Doors for IKEA PAX
Doors for IKEA PAX wardrobes
A PAX frame is a sound wardrobe wearing a flat-pack door. Change the fronts and the whole run reads as fitted joinery — shaker, fluted or V-grooved, machined one-piece from moisture-resistant MDF to the exact PAX face size and ready to spray in any colour you like.
Hinged and sliding, in both frame heights. The frames, hinges and tracks you already have stay where they are; only what you can see changes.
From £31.00 per door, excl. VAT
- Machined one-piece from 22mm MR MDF — no joints to open up or telegraph through paint
- Exact PAX face sizes: hinged and sliding, in both the 201 and 236cm frame heights
- Paint-grade and ready to spray, so the colour is yours rather than IKEA's four
- Priced live per door with no minimum order — one door or a whole wall of them
Door styles for PAX
Every style is made in every PAX size, so the choice is what the wardrobe should look like rather than what happens to fit. Pick one to see its 8 sizes and prices.
Card prices are for a 495 × 1946mm door — the 50cm hinged front on a 201 frame. Every size is priced individually.
PAX sizes we make
These are face sizes — the door itself, with IKEA's opening gap already taken off. Order the size on the tile and hang it.
- Hinged wardrobe doors4 sizesDrop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames), bored for IKEA's KOMPLEMENT hinges to hang on the plates already in your frame.
- Sliding wardrobe doors4 sizesDrop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.
Sliding panels overlap on the track, so a panel face is wider than half the opening — a 75cm door is 772mm and a 100cm door 1019mm. Measure the panel you are replacing, not the gap.
What a PAX hack actually involves
The appeal of PAX is the box: a rigid, well-made carcass in sizes that fill a wall, for a fraction of what a joiner would charge to build the same thing. The weakness is the front. IKEA's doors are thin, come in a handful of colours and read as flat-pack from across the room — which is exactly the part of the wardrobe anyone actually looks at.
So the hack is simple: keep the frames, change the doors, and finish them yourself. A 22mm one-piece MDF front with a real shaker rebate hangs on the same hinges, carries paint properly and lands the wardrobe somewhere between IKEA and bespoke — for the price of the doors and a weekend with a spray gun.
Scribe fillers and end panels are the other half of the job. Anything that has to be cut to a wall rather than a standard size can be ordered as a bespoke size in the configurator, in the same board and the same style as the doors, so the run finishes flush instead of stopping at the last frame.
How PAX door sizes work
PAX comes in two frame heights — 201cm and 236cm — and hinged doors are sized to the frame rather than the opening: 1946mm tall on a 201 frame and 2294mm on a 236. Widths follow the frame: a 50cm frame takes one 495mm door, a 100cm frame takes two.
Sliding doors are a different measurement altogether. Two panels share one opening and overlap in the middle, so each face is wider than half the opening: 772mm panels for a 150cm opening and 1019mm panels for a 200cm one, 2010mm or 2359mm tall depending on the frame. The aluminium frame and track are proprietary and get reused, so the panel face is the dimension that has to be right.
If your wardrobe predates PAX, or you have cut the frames to fit an alcove, measure the door you have and order that size directly in the configurator — any width and height is priced to the millimetre.
Doors for IKEA PAX — FAQ
Will your doors fit my IKEA PAX frames?
Yes. Every size on this hub is a standard PAX face size, so a front hangs on the frames, hinges and tracks you already have — you keep the PAX carcass and change only what shows. The opening gap IKEA leaves around each door is already taken off the sizes listed.
What size are IKEA PAX doors?
Hinged doors are 495mm wide for a 50cm frame and 246mm for a 25cm frame, in 1946mm (201 frame) or 2294mm (236 frame) heights — not the sizes in their names, so measure rather than multiply. They come bored for IKEA's KOMPLEMENT hinges, at the positions your frame's hinge plates expect. Sliding panels are wider than half the opening because they overlap on the track: 772mm for a 75cm door and 1019mm for a 100cm door, 2010mm or 2359mm tall.
Can I have one door on a 75cm PAX frame?
IKEA does not sell a single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair, which puts the joint off-centre. We can make a symmetrical one-piece 75cm front instead: open any hinged size in the configurator and set the width you want.
Do the sliding doors work with the IKEA track?
The sliding panels here are made to the standard PAX sliding face sizes, so they run in the aluminium frame and track you already have. Measure your existing panel before ordering — PAX sliding kits have changed over the years, and the panel face is what has to match, not the opening.
How thick are the doors?
22mm as standard, which is stiffer than IKEA's 18mm over a two-metre leaf and gives a deeper, better-looking shaker rebate. If you would rather match IKEA exactly, open any size in the configurator and switch the thickness to 18mm.
Are the doors drilled for hinges?
Yes — every hinged size comes bored for IKEA's own KOMPLEMENT hinges, with the cups and screw holes where the hinge plates already in your frame expect them, so the door goes straight on. Sliding panels are not drilled. If you would rather have a door undrilled, or bored for a different hinge, open it in the configurator and set the hinging yourself.
Do the doors come primed or painted?
Neither — every door is supplied sanded. We machine it from moisture-resistant MDF and then sand the faces, edges, panels and mouldings to 240 grit, so it arrives unprimed and unpainted, ready for your primer. Seal it with a primer made for MDF before your top coat, and paint it any colour you like.
Can I order a size that isn't listed?
Yes — the listed sizes are the standard PAX ones, not a limit. "Customise in 3D" opens any door in the configurator, where width, height, thickness and the rail and stile widths are all set to the millimetre with the price updating as you go. Useful for a filler panel, an end panel or a non-standard frame.
How much do doors for a PAX wardrobe cost?
Fronts start at £31.00 excluding VAT and every size shows its own price before you add it to a project. Prices are per door and include the machining — there is no minimum order, so a single door to test the colour is a normal order.
Start with one door
Pick a style to see every PAX size with its price, add the ones you need to a project, and keep it on your account until you are ready to order. Nothing is charged until you place the order, and a single door to test a colour is a perfectly normal thing to buy.
Doors for other cabinet systems
- Doors for IKEA METOD kitchens — fronts for METOD units, in every standard METOD size
- Doors for Howdens kitchens — fronts to every standard Howdens face size