Doors for IKEA PAX
IKEA PAX doors — Wide cove
Keep the PAX frames, change the fronts, and the whole run reads as fitted joinery. We make wide cove hinged and sliding doors to every standard PAX size — machined one-piece from moisture-resistant MDF, with the opening gap already allowed for. 8 sizes across 2 door types; sizes are width × height and prices exclude VAT.
From £54.00 per door, excl. VAT
Hinged wardrobe doors · 4 sizes
Drop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames), bored for IKEA's KOMPLEMENT hinges to hang on the plates already in your frame.
495 × 1946 mm
50cm door · 201 frame
£105.50+VATQty1
246 × 1946 mm
25cm door · 201 frame
£54.00+VATQty1
495 × 2294 mm
50cm door · 236 frame
£124.50+VATQty1
246 × 2294 mm
25cm door · 236 frame· approx
£64.00+VATQty1
IKEA sells no single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair. Ask us for a symmetrical bespoke 75cm front if you'd prefer one door.
Sliding wardrobe doors · 4 sizes
Drop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.
772 × 2010 mm
75cm door · 201 opening
£165.00+VATQty1
1019 × 2010 mm
100cm door · 201 opening
£217.50+VATQty1
772 × 2359 mm
75cm door · 236 opening
£193.50+VATQty1
1019 × 2359 mm
100cm door · 236 opening
£255.00+VATQty1
Sliding doors run in pairs on IKEA's track and overlap, so the panel face is wider than half the opening (75 → 772mm, 100 → 1019mm). The proprietary alu frame/track is reused — measure your frame before ordering.
Doors for IKEA PAX — FAQ
What are the wide cove fronts made from?
Each front is machined one-piece from moisture-resistant MDF — the wide cove detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint.
How much do wide cove doors for a IKEA PAX wardrobe cost?
Wide cove fronts start at £54.00 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.
Do the doors come primed or painted?
Neither — every door is supplied sanded. We machine it from moisture-resistant MDF and then sand the faces, edges, panels and mouldings to 240 grit, so it arrives unprimed and unpainted, ready for your primer. Seal it with a primer made for MDF before your top coat, and paint it any colour you like.
How is this different from the Coved door?
Scale. Both are concave flutes machined into a flat sheet, but the wide cove is cut with a much larger cutter, so each flute is about twice as broad and far shallower in proportion. A narrow door carries a few bold flutes rather than many fine ones.
How do you decide how many flutes a door gets?
You give us roughly the spacing you want and we solve the count, so the flutes land dead even from edge to edge rather than leaving a part-flute at one side. The cutter depth is solved with it, so the flat between flutes stays the same at whatever spacing you end up with.
Is the fluting applied, or cut into the door?
Cut. The flutes are machined straight into a single sheet of high-density MR MDF, so there are no applied mouldings to lift at the ends or telegraph a glue line through the paint.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about IKEA PAX wardrobes — sizing, fitting and how the face sizes work.