Doors for IKEA PAX
IKEA PAX doors — Art Deco Shaker
Keep the PAX frames, change the fronts, and the whole run reads as fitted joinery. We make art deco shaker hinged and sliding doors to every standard PAX size — machined one-piece from moisture-resistant MDF, with the opening gap already allowed for. 8 sizes across 2 door types; sizes are width × height and prices exclude VAT.
From £43.00 per door, excl. VAT
Hinged wardrobe doors · 4 sizes
Drop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames).
495 × 1946 mm
50cm door · 201 frame
£85.00+VATQty1
250 × 1946 mm
25cm door · 201 frame
£43.00+VATQty1
495 × 2290 mm
50cm door · 236 frame
£100.00+VATQty1
250 × 2290 mm
25cm door · 236 frame
£50.50+VATQty1
IKEA sells no single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair. Ask us for a symmetrical bespoke 75cm front if you'd prefer one door.
Sliding wardrobe doors · 4 sizes
Drop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.
772 × 2010 mm
75cm door · 201 opening
£137.00+VATQty1
1019 × 2010 mm
100cm door · 201 opening
£181.00+VATQty1
772 × 2359 mm
75cm door · 236 opening
£161.00+VATQty1
1019 × 2359 mm
100cm door · 236 opening
£212.50+VATQty1
Sliding doors run in pairs on IKEA's track and overlap, so the panel face is wider than half the opening (75 → 772mm, 100 → 1019mm). The proprietary alu frame/track is reused — measure your frame before ordering.
Doors for IKEA PAX — FAQ
What are the art deco shaker fronts made from, and how are they finished?
Each front is machined one-piece from moisture-resistant MDF — the art deco shaker detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint. They arrive paint-grade and ready to spray or hand-paint, which keeps the price down and lets you match any colour.
How much do art deco shaker doors for a IKEA PAX wardrobe cost?
Art deco shaker fronts start at £43.00 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.
What makes this an art-deco profile?
It's terraced rather than square. The margin steps down in stages — a 2mm riser, a 12mm tread, a 4mm riser, a second 12mm tread, then a final 4mm step into the field — which puts three separate shadow lines around the panel instead of one. It's the stepped detailing you see on 1930s cabinetry.
How much frame width does the stepped surround need?
The steps run to just over 34mm before the field starts, so rails and stiles need to be comfortably wider than that for the profile to read properly — the 80mm default suits it. The configurator clamps anything it can't cut.
Is there a rounded-corner version?
Yes — a radiused variant of the same terraced profile, which softens the corners of the surround while keeping the stepped shadow lines. Ask us for it by name and we'll set it up.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about IKEA PAX wardrobes — sizing, fitting and how the face sizes work.