Doors for IKEA PAX
IKEA PAX doors — V-groove
Keep the PAX frames, change the fronts, and the whole run reads as fitted joinery. We make v-groove hinged and sliding doors to every standard PAX size — machined one-piece from moisture-resistant MDF, with the opening gap already allowed for. 8 sizes across 2 door types; sizes are width × height and prices exclude VAT.
From £39.50 per door, excl. VAT
Hinged wardrobe doors · 4 sizes
Drop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames).
495 × 1946 mm
50cm door · 201 frame
£78.50+VATQty1
250 × 1946 mm
25cm door · 201 frame
£39.50+VATQty1
495 × 2290 mm
50cm door · 236 frame
£92.00+VATQty1
250 × 2290 mm
25cm door · 236 frame
£46.50+VATQty1
IKEA sells no single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair. Ask us for a symmetrical bespoke 75cm front if you'd prefer one door.
Sliding wardrobe doors · 4 sizes
Drop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.
772 × 2010 mm
75cm door · 201 opening
£126.00+VATQty1
1019 × 2010 mm
100cm door · 201 opening
£166.50+VATQty1
772 × 2359 mm
75cm door · 236 opening
£148.00+VATQty1
1019 × 2359 mm
100cm door · 236 opening
£195.00+VATQty1
Sliding doors run in pairs on IKEA's track and overlap, so the panel face is wider than half the opening (75 → 772mm, 100 → 1019mm). The proprietary alu frame/track is reused — measure your frame before ordering.
Doors for IKEA PAX — FAQ
What are the v-groove fronts made from, and how are they finished?
Each front is machined one-piece from moisture-resistant MDF — the v-groove detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint. They arrive paint-grade and ready to spray or hand-paint, which keeps the price down and lets you match any colour.
How much do v-groove doors for a IKEA PAX wardrobe cost?
V-groove fronts start at £39.50 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.
Is this real tongue-and-groove boarding?
No, and that's the point. It reads as boarding from across the room, but it's one sheet with fine 45° grooves machined into it — so there are no boards to shrink apart in a warm kitchen and no joints to open up under the paint.
Can the grooves run horizontally?
Yes — vertical or horizontal, set in the configurator. The spacing is solved for the run's length either way, so the lines stay even end to end rather than leaving a narrow board at one edge.
How is this different from the Shaker V-groove?
Where the grooves go. This is a slab with grooves across the whole face; the Shaker V-groove is a recessed-panel shaker with a groove only along each rail and stile line, to imitate a five-piece frame.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about IKEA PAX wardrobes — sizing, fitting and how the face sizes work.