Doors for IKEA PAX

IKEA PAX doors — Ovolo

Keep the PAX frames, change the fronts, and the whole run reads as fitted joinery. We make ovolo hinged and sliding doors to every standard PAX size — machined one-piece from moisture-resistant MDF, with the opening gap already allowed for. 8 sizes across 2 door types; sizes are width × height and prices exclude VAT.

From £46.50 per door, excl. VAT

Hinged wardrobe doors · 4 sizes

Drop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames), bored for IKEA's KOMPLEMENT hinges to hang on the plates already in your frame.

  • 495 × 1946mm ovolo replacement door for IKEA PAX hinged wardrobe doors

    495 × 1946 mm

    50cm door · 201 frame

    £90.50+VAT
    Qty
    1
    Customise in 3D
  • 246 × 1946mm ovolo replacement door for IKEA PAX hinged wardrobe doors

    246 × 1946 mm

    25cm door · 201 frame

    £46.50+VAT
    Qty
    1
    Customise in 3D
  • 495 × 2294mm ovolo replacement door for IKEA PAX hinged wardrobe doors

    495 × 2294 mm

    50cm door · 236 frame

    £107.00+VAT
    Qty
    1
    Customise in 3D
  • 246 × 2294mm ovolo replacement door for IKEA PAX hinged wardrobe doors

    246 × 2294 mm

    25cm door · 236 frame· approx

    £55.50+VAT
    Qty
    1
    Customise in 3D

IKEA sells no single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair. Ask us for a symmetrical bespoke 75cm front if you'd prefer one door.

Sliding wardrobe doors · 4 sizes

Drop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.

  • 772 × 2010mm ovolo replacement door for IKEA PAX sliding wardrobe doors

    772 × 2010 mm

    75cm door · 201 opening

    £141.00+VAT
    Qty
    1
    Customise in 3D
  • 1019 × 2010mm ovolo replacement door for IKEA PAX sliding wardrobe doors

    1019 × 2010 mm

    100cm door · 201 opening

    £185.50+VAT
    Qty
    1
    Customise in 3D
  • 772 × 2359mm ovolo replacement door for IKEA PAX sliding wardrobe doors

    772 × 2359 mm

    75cm door · 236 opening

    £165.00+VAT
    Qty
    1
    Customise in 3D
  • 1019 × 2359mm ovolo replacement door for IKEA PAX sliding wardrobe doors

    1019 × 2359 mm

    100cm door · 236 opening

    £218.00+VAT
    Qty
    1
    Customise in 3D

Sliding doors run in pairs on IKEA's track and overlap, so the panel face is wider than half the opening (75 → 772mm, 100 → 1019mm). The proprietary alu frame/track is reused — measure your frame before ordering.

Doors for IKEA PAX — FAQ

What are the ovolo fronts made from?

Each front is machined one-piece from moisture-resistant MDF — the ovolo detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint.

How much do ovolo doors for a IKEA PAX wardrobe cost?

Ovolo fronts start at £46.50 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.

Do the doors come primed or painted?

Neither — every door is supplied sanded. We machine it from moisture-resistant MDF and then sand the faces, edges, panels and mouldings to 240 grit, so it arrives unprimed and unpainted, ready for your primer. Seal it with a primer made for MDF before your top coat, and paint it any colour you like.

What does an ovolo bead look like?

It's a soft quarter-round run around the inside edge of the panel opening — a rounded convex bead rather than a square shoulder or an S-curve. It catches light gently, which is why it sits comfortably in both traditional and transitional kitchens.

How is the ovolo different from the raised & field door?

They share the moulding, not the panel. The ovolo has the same rounded bead around the opening but a flat recessed centre panel; the raised & field door adds a bevelled centre field that stands up close to flush with the frame.

Does a moulded profile take paint as well as a flat shaker?

Yes. It's the same moisture-resistant board throughout and the profile is cut, not built up, so there are no filled joints or end-grain corners in the moulding to flash under a topcoat. It's supplied paint-grade, ready to prime and spray.

Are these made to measure?

Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.

How are they made?

From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.

More about IKEA PAX wardrobes — sizing, fitting and how the face sizes work.