Doors for IKEA PAX
IKEA PAX doors — Slab
Keep the PAX frames, change the fronts, and the whole run reads as fitted joinery. We make slab hinged and sliding doors to every standard PAX size — machined one-piece from moisture-resistant MDF, with the opening gap already allowed for. 8 sizes across 2 door types; sizes are width × height and prices exclude VAT.
From £28.50 per door, excl. VAT
Hinged wardrobe doors · 4 sizes
Drop-in hinged doors for PAX frames — a 50cm frame takes one door, a 100cm frame two. In both PAX heights (201 and 236cm frames).
495 × 1946 mm
50cm door · 201 frame
£56.00+VATQty1
250 × 1946 mm
25cm door · 201 frame
£28.50+VATQty1
495 × 2290 mm
50cm door · 236 frame
£65.50+VATQty1
250 × 2290 mm
25cm door · 236 frame
£33.50+VATQty1
IKEA sells no single 75cm hinged door — a 75cm frame is clad with a 50 + 25 pair. Ask us for a symmetrical bespoke 75cm front if you'd prefer one door.
Sliding wardrobe doors · 4 sizes
Drop-in sliding-door fronts for PAX — 75cm panels for a 150cm opening, 100cm panels for a 200cm opening, in both PAX heights.
772 × 2010 mm
75cm door · 201 opening
£90.00+VATQty1
1019 × 2010 mm
100cm door · 201 opening
£118.50+VATQty1
772 × 2359 mm
75cm door · 236 opening
£105.50+VATQty1
1019 × 2359 mm
100cm door · 236 opening
£139.00+VATQty1
Sliding doors run in pairs on IKEA's track and overlap, so the panel face is wider than half the opening (75 → 772mm, 100 → 1019mm). The proprietary alu frame/track is reused — measure your frame before ordering.
Doors for IKEA PAX — FAQ
What are the slab fronts made from, and how are they finished?
Each front is machined one-piece from moisture-resistant MDF — the slab detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint. They arrive paint-grade and ready to spray or hand-paint, which keeps the price down and lets you match any colour.
How much do slab doors for a IKEA PAX wardrobe cost?
Slab fronts start at £28.50 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.
How flat is a slab door, really?
Flat enough for handleless spraying, which is the demanding case. It's a single piece of ultra-high-density MR MDF with nothing pocketed into the face, so there's no unbalanced machining pulling it out of plane.
Can a slab door have a shaped head?
Yes — raked (a single slope) and splayed (a flat run into a slope) heads are both available on a slab, priced as the bounding rectangle plus a flat shaped-head addition. Give us the leg heights and we cut the head to match your ceiling line.
Should I choose 18mm or 22mm board?
18mm is the standard for kitchen doors and drawer fronts. 22mm gives a heavier edge reveal on tall or wide doors; 25mm is available if you switch to the Finsa Hidrofugo Plus board, which carries a small material uplift.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about IKEA PAX wardrobes — sizing, fitting and how the face sizes work.