JoinerySupply
10% trade discount for all accounts opened by 30 September.Open account →

Doors for IKEA METOD

IKEA METOD doors — Ovolo

Buy the boxes from IKEA and put a proper front on them. We make ovolo doors and drawer fronts to every standard METOD face size — base, wall, tall and larder units, MAXIMERA drawer fronts, corner bifolds and integrated appliance panels — machined one-piece from moisture-resistant MDF, with the 3mm opening gap METOD leaves around each front already allowed for. 51 sizes across 7 unit types; sizes are width × height and prices exclude VAT.

From £18.00 per door, excl. VAT

Door style

Base cabinet doors · 4 sizes

Full-height doors for 80cm-high METOD base cabinets — an 80cm-wide base takes two 40cm doors.

Wall cabinet doors · 14 sizes

Doors for eye-level METOD wall cabinets — 40, 60, 80 and 100cm high.

Tall & larder doors · 10 sizes

Doors for 200 and 220cm-high METOD high cabinets — larder, pantry and integrated towers — in 40 and 60cm widths.

Tall cabinets are often clad with two stacked doors (e.g. 100+100, 140+60); the sizes here are single full-height doors. 220cm-high doors are derived from the 220 frame via the -3mm rule.

Drawer fronts · 6 sizes

Low and medium MAXIMERA drawer fronts, in 40, 60 and 80cm widths.

Pan & deep drawer fronts · 8 sizes

Tall MAXIMERA fronts for pan and deep drawers — 40, 60 and 80cm high.

Corner & bifold doors · 4 sizes

Bifold doors for METOD corner base and wall cabinets, plus single corner and cargo pull-out fronts.

  • 254 × 797mm ovolo replacement door for IKEA METOD corner & bifold doors

    254 × 797 mm

    Bifold leaf (25×80)

    £20.00+VAT
    Qty
    1
    Customise in 3D
  • 254 × 997mm ovolo replacement door for IKEA METOD corner & bifold doors

    254 × 997 mm

    Bifold leaf (25×100)· approx

    £23.00+VAT
    Qty
    1
    Customise in 3D
  • 597 × 797mm ovolo replacement door for IKEA METOD corner & bifold doors

    597 × 797 mm

    Single corner door

    £43.50+VAT
    Qty
    1
    Customise in 3D
  • 297 × 797mm ovolo replacement door for IKEA METOD corner & bifold doors

    297 × 797 mm

    Corner cargo / pull-out

    £21.50+VAT
    Qty
    1
    Customise in 3D

The 25×80 bifold leaf is 254mm wide (a corner-coverage label supplied as a folding pair), so it does not follow the -3mm width rule.

Appliance & integrated doors · 5 sizes

Decor fronts that disguise appliances integrated into METOD housings — dishwasher, oven housing and tall fridge/freezer towers.

  • 597 × 797mm ovolo replacement door for IKEA METOD appliance & integrated doors

    597 × 797 mm

    Integrated dishwasher (60cm)

    £43.50+VAT
    Qty
    1
    Customise in 3D
  • 447 × 797mm ovolo replacement door for IKEA METOD appliance & integrated doors

    447 × 797 mm

    Integrated dishwasher (45cm)· approx

    £32.50+VAT
    Qty
    1
    Customise in 3D
  • 597 × 197mm ovolo replacement door for IKEA METOD appliance & integrated doors

    597 × 197 mm

    Oven housing drawer front

    £18.00+VAT
    Qty
    1
    Customise in 3D
  • 597 × 397mm ovolo replacement door for IKEA METOD appliance & integrated doors

    597 × 397 mm

    Oven / microwave housing front

    £21.50+VAT
    Qty
    1
    Customise in 3D
  • 597 × 1997mm ovolo replacement door for IKEA METOD appliance & integrated doors

    597 × 1997 mm

    Integrated tall fridge/freezer

    £108.00+VAT
    Qty
    1
    Customise in 3D

Integrated fridge/freezer and oven-housing heights are cut to the appliance aperture, so they have no single catalogue height and are quoted on request.

How IKEA METOD door sizes work

METOD is IKEA’s current kitchen cabinet system, and its fronts follow one rule: the door or drawer front is the cabinet’s nominal size minus 3mm on both axes, leaving a 3mm gap around each front so doors clear one another when they swing. A 60 × 80cm base unit therefore takes a 597 × 797mm door, and a 40cm wall unit a 397mm-wide one. Every size listed above is already the face size, so there is nothing to subtract before you order.

METOD cabinets come in 20, 30, 40, 60 and 80cm nominal widths, and wide units are usually clad with a pair of narrower doors rather than one wide one — an 80cm base takes two 40cm doors. Heights run 40, 60, 80 and 100cm on wall units and 120 to 220cm on tall and larder towers, which are often clad with two stacked fronts. Drawer fronts follow the MAXIMERA heights: low, medium, deep and pan.

If your kitchen predates 2014 it is likely FAKTUM rather than METOD, which does not follow the size matrix above — measure a front you already have and order that size directly in the configurator, where any width and height is priced to the millimetre.

Doors for IKEA METOD units — FAQ

What are the ovolo fronts made from, and how are they finished?

Each front is machined one-piece from moisture-resistant MDF — the ovolo detail is cut into a single board rather than assembled from parts, so there are no joints to move or telegraph through paint. They arrive paint-grade and ready to spray or hand-paint, which keeps the price down and lets you match any colour.

How much do ovolo doors for a METOD kitchen cost?

Ovolo fronts start at £18.00 excluding VAT, and every size on this page shows its own price before you add anything to a project. Prices are per door and include the machining — there is no minimum order.

What does an ovolo bead look like?

It's a soft quarter-round run around the inside edge of the panel opening — a rounded convex bead rather than a square shoulder or an S-curve. It catches light gently, which is why it sits comfortably in both traditional and transitional kitchens.

How is the ovolo different from the raised & field door?

They share the moulding, not the panel. The ovolo has the same rounded bead around the opening but a flat recessed centre panel; the raised & field door adds a bevelled centre field that stands up close to flush with the frame.

Does a moulded profile take paint as well as a flat shaker?

Yes. It's the same moisture-resistant board throughout and the profile is cut, not built up, so there are no filled joints or end-grain corners in the moulding to flash under a topcoat. It's supplied paint-grade, ready to prime and spray.

Are these made to measure?

Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.

How are they made?

From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.

Doors for other cabinet systems