Slab kitchen end panels
Kitchen end panels in our slab profile, machined one-piece from moisture-resistant MDF to your exact size. End panels close off the exposed sides of a kitchen run and tie the whole scheme together. We cut them one-piece from MR MDF to the exact panel size you need — flat slab faces that finish to match your doors.
A slab door is the cleanest face in the range: a single flat panel with no recess, no applied moulding and no joints. Cut from one sheet of moisture-resistant high-density MDF, it gives you the dead-flat surface a sprayed handleless kitchen depends on.
What you get
- One-piece ultra-high-density MR MDF — no joints to move
- Square or shaped (raked / splayed) heads
- Cut to ±0.25mm up to 1200mm × 3025mm
Sizes & prices
Slab kitchen end panels in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
How flat is a slab door, really?
Flat enough for handleless spraying, which is the demanding case. It's a single piece of ultra-high-density MR MDF with nothing pocketed into the face, so there's no unbalanced machining pulling it out of plane.
Can a slab door have a shaped head?
Yes — raked (a single slope) and splayed (a flat run into a slope) heads are both available on a slab, priced as the bounding rectangle plus a flat shaped-head addition. Give us the leg heights and we cut the head to match your ceiling line.
Should I choose 18mm or 22mm board?
18mm is the standard for kitchen doors and drawer fronts. 22mm gives a heavier edge reveal on tall or wide doors; 25mm is available if you switch to the Finsa Hidrofugo Plus board, which carries a small material uplift.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about kitchen end panels — sizing, hinge boring and finish.