Shaker kitchen end panels
Kitchen end panels in our shaker profile, machined one-piece from moisture-resistant MDF to your exact size. End panels close off the exposed sides of a kitchen run and tie the whole scheme together. We cut them one-piece from MR MDF to the exact panel size you need — flat slab faces that finish to match your doors.
The shaker is the definitive English kitchen door: a flat recessed centre panel framed by clean, square rails and stiles. Ours is machined from a single sheet rather than framed from five pieces, so there are no mitre joints at the corners to crack or shadow through your paint.
What you get
- Recessed centre panel, no glue, caulk or joints
- Adjustable rail / stile widths and pocket depth
- One-piece MR MDF — paint-grade and stable
- Optional double-sided (front + rear) pocketing
Sizes & prices
Shaker kitchen end panels in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
What size should an end panel be?
An end panel should cover the exposed side of the carcass plus any overhang you want at the front. Measure the depth and height of the run and enter those sizes — we cut to the millimetre.
Will the end panel match my doors?
End panels are flat slab faces finished in the same board, so once painted or wrapped to the same colour they read as a seamless continuation of the doors.
How big can an end panel be?
Up to 3030mm on the long edge and 1200mm on the short edge, which covers full-height tall-unit end panels.