Deco shaker kitchen end panels
Kitchen end panels in our deco shaker profile, machined one-piece from moisture-resistant MDF to your exact size. End panels close off the exposed sides of a kitchen run and tie the whole scheme together. We cut them one-piece from MR MDF to the exact panel size you need — flat slab faces that finish to match your doors.
The Deco shaker — also known as a stepped shaker — reworks our classic recessed panel with a terraced, art-deco surround. Instead of a single square shoulder, the margin around the panel steps down in stages: a 2mm riser, a 12mm tread, a 4mm riser, a second 12mm tread, then a final 4mm step to the recessed field — three crisp shadow lines that catch the light like 1930s cabinetry.
What you get
- Terraced, stepped panel surround — three defined shadow lines
- Square-cut steps: 2mm / 12mm / 4mm / 12mm / 4mm to the field
- One-piece MR MDF — no mitred corner joints to open
- Cut to +-0.25mm up to 1200mm × 3030mm
Sizes & prices
Deco shaker kitchen end panels in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
What size should an end panel be?
An end panel should cover the exposed side of the carcass plus any overhang you want at the front. Measure the depth and height of the run and enter those sizes — we cut to the millimetre.
Will the end panel match my doors?
End panels are flat slab faces finished in the same board, so once painted or wrapped to the same colour they read as a seamless continuation of the doors.
How big can an end panel be?
Up to 3030mm on the long edge and 1200mm on the short edge, which covers full-height tall-unit end panels.