V Shaker kitchen base unit doors
Kitchen base unit doors in our v shaker profile, machined one-piece from moisture-resistant MDF to your exact size. Base unit doors take the most use in any kitchen, so they need to be flat, stable and dead-square. Ours are machined one-piece from moisture-resistant MDF, so there are no framed joints to loosen behind the hinges over years of slamming.
The V Shaker reworks our classic recessed-panel shaker with a chamfered surround. Instead of a plain square shoulder, the margin around the panel steps down 2mm, runs a shallow bevel cut with a 150° tool, then steps down again to the recessed field — a crisp, defined shadow line that catches the light like traditional hand-run joinery.
What you get
- Stepped, chamfered panel surround — a defined shadow line
- Profiled with a 150° tool: 2mm step, bevel, 2mm step
- One-piece MR MDF — no mitred corner joints to open
- Cut to +-0.25mm up to 1200mm × 3030mm
Sizes & prices
V Shaker kitchen base unit doors in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
What height are standard base unit doors?
Most UK base units are 720mm-high carcasses, which take a 715mm door once you allow for the gap. We'll cut any height you need, standard or bespoke.
Can you bore for my hinges?
Yes — we bore for Blum, Blum Inserta and Hettich hinges at the positions you choose in the configurator.
Do you do double-sided pocketing?
Yes. Shaker doors can be pocketed on the front only, or on both faces for a symmetric look — choose this in the configurator.