Raised & field kitchen base unit doors
Kitchen base unit doors in our raised & field profile, machined one-piece from moisture-resistant MDF to your exact size. Base unit doors take the most use in any kitchen, so they need to be flat, stable and dead-square. Ours are machined one-piece from moisture-resistant MDF, so there are no framed joints to loosen behind the hinges over years of slamming.
The raised-and-fielded panel is the most traditional face in the range: an ovolo-moulded margin runs around the opening and a bevelled centre field sits flush with the frame — the classic choice for in-frame and period kitchens.
What you get
- Profiled ovolo moulding with a bevelled raised field
- Adjustable rail / stile widths
- One-piece MR MDF — no mitred corner joints
- Cut to ±0.25mm up to 1200mm × 3025mm
Sizes & prices
Raised & field kitchen base unit doors in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
What does “raised and fielded” mean?
The centre panel isn't recessed below the frame — it's bevelled up so the flat centre field sits close to flush with the surrounding frame, with an ovolo-moulded margin running around it. It's the most traditional face in the range and the usual choice for in-frame and period kitchens.
Is the moulding a separate piece stuck on?
No. The whole profile — moulding and bevelled field — is swept out of the same sheet of MR MDF. On a conventional door the moulding is applied or scribed and those joints are the first thing to open at the corners; there's nothing here to come away.
Does the raised field work on a door with a shaped head?
Yes — the moulding follows a raked or splayed head round, so the profile stays continuous rather than dying into the slope. Shaped heads carry a flat addition on top of the door price, whatever the style, and the configurator shows it as you set the legs.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about kitchen base unit doors — sizing, hinge boring and finish.