Slab kitchen tall & larder doors
Kitchen tall & larder doors in our slab profile, machined one-piece from moisture-resistant MDF to your exact size. Larder and tall-unit doors are large and unforgiving — any bow or joint movement shows immediately on a full-height face. Machining them one-piece from high-density MR MDF keeps them flat and seamless where a framed door would risk telegraphing its joints.
A slab door is the cleanest face in the range: a single flat panel with no recess, no applied moulding and no joints. Cut from one sheet of moisture-resistant high-density MDF, it gives you the dead-flat surface a sprayed handleless kitchen depends on.
What you get
- One-piece ultra-high-density MR MDF — no joints to move
- Square or shaped (raked / splayed) heads
- Cut to +-0.25mm up to 1200mm × 3025mm
Sizes & prices
Slab kitchen tall & larder doors in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
What's the maximum door size you can make?
One dimension can be up to 3025mm, with the other up to 1200mm — so the largest square door is 1200 × 1200mm. Full-height larder doors are well within range. Anything over 2420mm on the long edge is cut from our 3050mm board, which is stocked in Finsa Hidrofugo Plus only — pick that board in the designer and the size goes through.
How many hinges does a tall door need?
The configurator recommends a hinge count based on the door height and bores them at evenly spaced positions; you can adjust the count and positions.
Will a tall one-piece door stay flat?
Ultra-high-density MR MDF is dimensionally stable, and a one-piece door has no frame joints to move — the main reasons we machine from solid board rather than framing up.