Coved kitchen tall & larder doors
Kitchen tall & larder doors in our coved profile, machined one-piece from moisture-resistant MDF to your exact size. Larder and tall-unit doors are large and unforgiving — any bow or joint movement shows immediately on a full-height face. Machining them one-piece from high-density MR MDF keeps them flat and seamless where a framed door would risk telegraphing its joints.
A coved door is a run of parallel concave flutes machined straight across the face — the soft, shadow-filled ribbing that has come back into kitchens and bootrooms, and the one detail that reads as expensive from across a room. Ours is cut into a single sheet of moisture-resistant high-density MDF, so there are no applied mouldings to lift and nothing to telegraph through the paint.
What you get
- Parallel concave flutes at a calculated even spacing
- One-piece ultra-high-density MR MDF — no applied mouldings
- Cutter depth solved to hold an even flat between flutes
Sizes & prices
Coved kitchen tall & larder doors in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
- Shaker tall & larder doors
- Shaker V-groove tall & larder doors
- V Shaker tall & larder doors
- Art Deco Shaker tall & larder doors
- Raised & field tall & larder doors
- Ovolo tall & larder doors
- Slab tall & larder doors
- Faux face frame tall & larder doors
- Wide cove tall & larder doors
- V-groove tall & larder doors
- About coved doors
Frequently asked questions
What's the maximum door size you can make?
One dimension can be up to 3025mm, with the other up to 1200mm — so the largest square door is 1200 × 1200mm. Full-height larder doors are well within range. Anything over 2420mm on the long edge is cut from our 3050mm board, which is stocked in Finsa Hidrofugo Plus only — pick that board in the designer and the size goes through.
How many hinges does a tall door need?
The configurator recommends a hinge count based on the door height and bores them at evenly spaced positions; you can adjust the count and positions.
Will a tall one-piece door stay flat?
Ultra-high-density MR MDF is dimensionally stable, and a one-piece door has no frame joints to move — the main reasons we machine from solid board rather than framing up.