Shaker kitchen drawer fronts
Kitchen drawer fronts in our shaker profile, machined one-piece from moisture-resistant MDF to your exact size. Drawer fronts have to line up perfectly with the doors around them, so consistency matters most here. Order them in the same profile and pocket depth as your doors and we machine them from the same board spec for a seamless run.
The shaker is the definitive English kitchen door: a flat recessed centre panel framed by clean, square rails and stiles. Ours is machined from a single sheet rather than framed from five pieces, so there are no mitre joints at the corners to crack or shadow through your paint.
What you get
- Recessed centre panel, no glue, caulk or joints
- Adjustable rail / stile widths and pocket depth
- One-piece MR MDF — paint-grade and stable
- Optional double-sided (front + rear) pocketing
Sizes & prices
Shaker kitchen drawer fronts in common sizes. Made to measure — enter your exact size for an instant price.
Other styles for these doors
Frequently asked questions
How wide should the rails and stiles be on a shaker door?
Traditional English kitchens usually sit around 70–80mm, which is what our standard shaker opens at; drop towards 45mm or below and the door reads contemporary. You can set each rail and stile independently in the configurator, and it doesn't change the price — we price by area, so you're choosing the look, not paying for the frame.
Can I have the recessed panel on both faces?
Yes. Front-only is standard, but you can pocket the back face as well — worth doing on island ends, room dividers and any door that's seen from behind. It's a second machining pass, so the configurator reprices as soon as you turn it on.
Will the panel joints show through the paint?
There are none to show. A five-piece shaker is glued up from four frame pieces and a panel, and those mitres are what crack and telegraph through a sprayed finish as the parts move. Ours is pocketed out of one sheet of MR MDF, so the face is continuous.
Are these made to measure?
Yes. Every door is CNC-machined one-piece from moisture-resistant MDF to your exact width and height — enter the size in the configurator and the price updates as you type.
How are they made?
From a single sheet of ultra-high-density MR MDF, so there are no mitred corner joints to open or shadow through your paint.
More about kitchen drawer fronts — sizing, hinge boring and finish.